ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater

ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater

    Features:

  • High quality material, nontoxic, corrosion and wear resistant.
  • Pretty product for students, will exercise their hand-on ability.Easy to use, superior performance.
  • Using a protective power supply, don’t use battery or battery power
  • ZVS heating power supply module including heating coil.The power supply used for heating must be large enough
  • Ensure all the components welding right, power line connect in right way, than to set up an electric circuit.

LM YN ZVS Driver Board ZVS Induction Heating Circuit DC12-30V Zero Voltage Switch Power Supply Driver Board

LM YN ZVS Driver Board ZVS Induction Heating Circuit DC12-30V Zero Voltage Switch Power Supply Driver Board

    Features:

  • Zero Voltage Switch Power Supply Driver Board,Operating voltage: DC12V-30V (less than 12V does not work)
  • Power Requirements: Voltage = 12V, Current ≥ 5A ; Voltage ≥ 15V, Current ≥ 10A (the greater the current, the more adequate power);
  • Operating frequency: 30kHz-50kHz, adaptive.
  • Output voltage / power: input 12V / 5A, the output of about 10000V / 60W; input 24V / 10A, the output of about 20000V / 200W.
  • ZVS Driver Board User Manual Schematic Download Link : https://www.amazon.com/clouddrive/share/vITfamNYMTgA5Vco6Di9lZAthokGmJ56ULBGcDDVRMh

ZVS Tesla Coil Driver Board, Tesla Coil Flyback Driver Marx Generator w/Jacob’ladder Ignition Coil 12-36V

ZVS Tesla Coil Driver Board, Tesla Coil Flyback Driver Marx Generator w/Jacob

    Features:

  • 【Parameters】12V-36VDC input (24V recommended), can reach 12V input power of 50V-100W, the maximum 24V input can reach 200W or more, and the power supply current is preferably greater than 10A.
  • 【Features】Flyback drive circuits, like zero voltage switching, are used to drive the ignition coil. A large number of fans call them “ZVS circuits”.
  • 【Wide application】The ZVS Tesla coil flyback drive circuit is widely used in Spark Gap Tesla unit (SGTC) and Jacob, stairs, generators, Marx, etc.
  • 【High-voltage direct current output】 ZVS flyback driver has large power, the heat is low, the fan is simple and reliable, and the voltage input voltage is about 1000 times.
  • 【After-sales service】We are committed to providing the best products and best services. If you have any questions about our products, please contact us by email. Our professional customer service team will reply and solve your problems in time!

DollaTek ZVS Driver Board ZVS Induction Heating Circuit DC12-30V Zero Voltage Switch Power Supply Driver Board

DollaTek ZVS Driver Board ZVS Induction Heating Circuit DC12-30V Zero Voltage Switch Power Supply Driver Board

    Features:

  • Operating frequency: 30kHz-50kHz, adaptive.
  • Power Requirements: Voltage = 12V, Current ≥ 5A ; Voltage ≥ 15V, Current ≥ 10A (the greater the current, the more adequate power)
  • Zero Voltage Switch Power Supply Driver Board,Operating voltage: DC12V-30V (less than 12V does not work)
  • Output voltage / power: input 12V / 5A, the output of about 10000V / 60W; input 24V / 10A, the output of about 20000V / 200W.
  • Please Note The Input and output of the positive and negative, Reverse will damage the board

ZVS 20A 1000W DC12-30V Low Voltage Induction Heating Module Flyback Heater Driver Board

ZVS 20A 1000W DC12-30V Low Voltage Induction Heating Module Flyback Heater Driver Board

    Features:

  • 💝ZVS 20A 1000W Low Voltage Induction Heating Module
  • 💝Flyback Heater Driver Board
  • 💝24V input with no load current of 3A
  • 💝zero voltage switching (ZVS) tesla coil flyback driver board with high power output up to 300W, support DC12-30V input and current should be over 10A, igh voltage output ideal for DIY spark gap tesla coil (SGTC), Jacobs ladder and Marx generator, etc.
  • 💝Large inductor of stable performance parameter, 30mm big magnet ring, 1.2mm pure copper wire; the bottom of circuit board high current part is soldered, all resistor adopt five ring tight resistor

WINGONEER ZVS Driver Board ZVS Induction Heating Circuit DC12-30V Zero Voltage Switch Power Supply Driver Board

WINGONEER ZVS Driver Board ZVS Induction Heating Circuit DC12-30V Zero Voltage Switch Power Supply Driver Board

    Features:

  • Operating frequency: 30kHz-50kHz, adaptive.
  • Power Requirements: Voltage = 12V, Current ≥ 5A ; Voltage ≥ 15V, Current ≥ 10A (the greater the current, the more adequate power)
  • Zero Voltage Switch Power Supply Driver Board,Operating voltage: DC12V-30V (less than 12V does not work)
  • Output voltage / power: input 12V / 5A, the output of about 10000V / 60W; input 24V / 10A, the output of about 20000V / 200W.
  • Please Note The Input and output of the positive and negative, Reverse will damage the board

Flyback Driver Heater Induction Power Heating Supply Module, ZVS Low Voltage Induction Heating Board Module with Coil Power Supply Module, DC5~15V 150W

Flyback Driver Heater Induction Power Heating Supply Module, ZVS Low Voltage Induction Heating Board Module with Coil Power Supply Module, DC5~15V 150W

    Features:

  • ZVS Driver Module: This is a non-tap mini ZVS finished board excluding heating coil, transformer, cooling fan, etc
  • Working Power Range: The maximum power is 150W (15V induction heating). Push the transformer 12V, the primary 5+5 turns, about 30W
  • Working Voltage Range: Input voltage DC 5V~15V, this voltage range is the voltage at work, not the voltage when the power supply is empty! (The voltage exceeds 15V or below 5V. We do not guarantee that it can work normally.)
  • Notice: Make sure that all components are soldered correctly, the positive and negative poles of the power cord are not reversely connected, after the load is connected (heating coil, transformer), and then power on! Can not power on at no load which makes it easily broken
  • Note: When inductive heating, usually work for 5 minutes to power off cooling. Because the current is relatively large during induction heating, the coil heat is also relatively large. When heating, part of the heat generated by the heated object is transmitted to the heating coil. For a long time, the temperature of the heating coil is high. If the heating coil is connected to the terminal, the plastic part of the terminal will be melted!

5-12V 120W Mini ZVS Induction Heating Board Flyback Driver Heater Ignition Coil

5-12V 120W Mini ZVS Induction Heating Board Flyback Driver Heater Ignition Coil

    Features:

  • ZVS heating power supply module includes the heating coil
  • Input Voltage:DC 5V~12V(This voltage range is the voltage during operation, not the voltage when the power supply is unloaded).
  • Maximum power 120W (when 12V eddy – current heating)
  • Ensure all the components welding right, power line connected in the right way, then to set up an electric circuit.
  • The width of the heated object is as far as possible between the 1/3~1/2 of the inner diameter of the heating coil, the maximum width is less than 2/3.

IJJ ZVS 20A 1000W Low Voltage Induction Heating Module Flyback Heater Driver Board

IJJ ZVS 20A 1000W Low Voltage Induction Heating Module Flyback Heater Driver Board

    Features:

  • 🍄ZVS tesla coil flyback driver board with high power output up to 300W, support DC12-30V input and current should be over 10A, igh voltage output ideal for DIY spark gap tesla coil , Jacobs ladder and Marx generator, etc.
  • 🍄Large inductor of stable performance parameter, 30mm big magnet ring, 1.2mm pure copper wire; the bottom of circuit board high current part is soldered, all resistor adopt five ring tight resistor
  • 🍄Other driving is immeasurably, the higher the voltage the longer the arc, personally test with 27V/ 15A switching power supply can pull more than 80MM arc, basically no heat; can also be induction heating or quenching, this is also The higher the voltage the faster the heating, while the greater the heat, it is recommended to heat the solid object diameter does not exceed 2/3 of the coil.
  • 🍄Adopt 1.6mm double side fiber glass board, size: 90x90mm/3.54″x3.54″ (L*W)
  • 🍄If you encounter any problems, please contact us in time, we will solve it for you as soon as possible

As an Amazon Associate I earn from qualifying purchases.

Random products:

horse riding for men
blue wave chlorine dispensers