SC357-1 Auto World SC357-1 Thunderjet Sam Posey 1970 Dodge Challenger HO Scale Slot Car
- Thunderjet “T-Jet” Ultra-G Chassis
- Neodymium Traction Magnet for Track Gripping Performance
- Compatible with most HO scale tracks – AFX, Aurora, Tomy, Tyco, Auto World
SZDoit 4WD Smart Metal Robot Car Chassis Kit for Arduino / Raspberry pi DIY Robotic Steam Platform with 4pcs TT Encoder Motor, 65mm Rubber Wheel, Speed Measure Encoding Disc
- Solid: the frame is metal and beautiful. The load is about 0-0.5kg. It is the best choice for your function realization.
- Cheap: Maybe it is very cheap for all the diy metal smart car chassis. So, many people would like to make a diy moving platform.
- Convenience: This car is very installed conveniently, by just installing some srews and nuts. So, you can think carefully for the program code.
- Compatible: This smart car chassis can be compatible with many controller, like arduino, raspberry pi, stm32, and other chip.
diymore 2WD Smart Robot Car Chassis Kit with 2 Motor (1:48) Speed Encoder Battery Box for Arduino UNO Project
- This car is the tachometer encoder.
- Mechanical structure is simple, it is easy to install.
- No add-ins is very convenient, the entire system highly integrated. Can be used to measure distance, speed.
- 4 on the 5th battery compartment, convenient power throughout the system in a switch, while starting and stopping.
- Note: Motor power supply is 3V~6V. All the parameter above is tested without load.
The perseids DIY Robot Smart Car Chassis Kit with Speed Encoder, 2 Wheels and Battery Box (2 Wheels)
- Intelligent Tracing Robot car chassis, high degree of freedom, ideal for DIY subject, science education, development of hobbies and interest, educational toys for kids.
- Mechanical structure is simple, 2 DC gear motors, flexible turning, eco-friendly chassis is stability and very easy to expand.
- No add-ins is very convenient, the entire system is highly integrated. Can be used to measure distance and speed.
- Educational learning kit for beginners (kids) to get hands-on experience about Robotics & Can extend electronics system like Raspberry Pi, or Arduino etc. Realizing functions of tracing, obstacle avoidance, distance testing, speed testing, and wireless remote control.
- Size: 21 x 10cm (LxW). Wheel size: 6 x 2.7cm (Dia.xH). Motor power supply is 3V ~ 6V. All the parameter above is tested without load. Note: The kit does not include any module, please purchase in needs.
Magnet Paint Co Chassis Saver – Gloss Black – MPC-UCP99-04 (Quarts)
- Active Guarding – Proactively shields vintage trucks and automobiles underbody surfaces including frames, floorboards, engine compartments, trunk areas, under fenders, fire walls, rocker panels, behind bumpers, etc.
- General Maintenance – The UCP99 Gloss Black is the industry’s standard in high performance rust guard. Chassis paint finish wont crack, chip, flake, or peel. Protects from hard weather; snow, rain, mud, and dirt.
- Easy To Apply – Make contact directly to rust spots or places to protect against rust; only requires minimal surface preparation using a wire brush; no hardeners, topcoats, primers, activators required.
- Unafftected By Other Substances – This formula is unstoppable! Chassis Saver is unchanged by diesel fuel, gasoline, road salt, oils, solvents, corrosives, battery acids, hydraulic fluids, or chemicals.
- Committed To Total Statisfaction – Under the harshest condition, Chassis Saver has proven itself for over 10 years! Over 350 townships, local DOT fleet maintenance and public works departments use Chassis Saver.
Chassis Saver? Antique Satin Black, 1/2 Pints by MPC
- Chassis Saver Antique Satin Black, 1/2 Pints MPC-UCP970-16
EMO Smart Robot Car Chassis Kit with Motors, Speed Encoder and Battery Box for DIY
- Ideal for DIY, Multi-function and Various kinds of positioning holes
- Holes for all kinds of modules. It can be used with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control
- Convenient installation, firm and reliable
- 2 DC gear motors , Motor reduction ratio of 48:1
- Can be used with raspberry pi or arduino
Aluminum Open Chassis, ATX / M-ATX / ITX Open Chassis Vertical Overclocking Chassis, DIY Chassis Chassis, 20×20 DIY Open Frame PC Case
- ★ 【Light and Compact Bare Frame】Computer motherboard case rack with light and compact bare frame of building blocks, it is easy to disassemble and can be superimposed
- ★【What Applicable Motherboard】What DIY chassis bracket applicable motherboard is suitable for is ITX Motherboard (17 x 17cm) M-ATX, ATX.Support independent graphics card, which requires optional graphics card accessories
- ★【Good Heat Dissipation】Open chassis design, good heat dissipation. Support ATX ordinary power supply.20×20 aluminum profile with stable vertical structure.Simple aluminum profile construction, for you to fully experience DIY fun
- ★【Good Compatibility】support ATX, M-ATX, for ITX motherboard. You can even carry it away, which need to be equippped with a handle.The size of bare metal frame after assembly(LxWxH)is approx.12.40×9.69×13.9inch,The chassis needs to be installed by DIY yourself. Be patient and follow the instructions
- ★【Note&Quality Assurance】Some panels are designed for disassembly at one time, so start after considering and preparing. Regular maintenance of the acrylic panel will maintain the brightness of the original tear film for a long time.Our products guarantee certain safety quality and brand new product status, and have first-class after-sales
As an Amazon Associate I earn from qualifying purchases.