HiLetgo FT232RL FTDI Mini USB to TTL Serial Converter Adapter Module 3.3V 5.5V FT232R Breakout FT232RL USB to Serial Mini USB to TTL Adapter Board for Arduino

HiLetgo FT232RL FTDI Mini USB to TTL Serial Converter Adapter Module 3.3V 5.5V FT232R Breakout FT232RL USB to Serial Mini USB to TTL Adapter Board for Arduino

    Features:

  • Chipset: FT232RL, not genuine FTDI chip, Working Voltage: 3.3V/5.5V
  • RXD/TXD transceiver communication indicator, with 500MA self-restore Fuse
  • Pin Definition: DTR,RXD,TX,VCC,CTS,GND
  • Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit /Vsita/, do not Support Win8

DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL

DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL

    Features:

  • Support 4 kinds of TTL levels:This is a versatile USB to TTL converter. It is powerful enough to handle almost all TTL level communications. It is compatible with 5V, 3.3V, 2.5V, 1.8V TTL levels.
  • FTDI FT232RL Chip:Built-in original FTDI FT232RL Chip.The DSD TECH brand never uses cheap fake chips.
  • Not only provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND pins,but also provides access to DSR,R1,DCD,DTR,RESET pins
  • Protective case: Come with a protective case, this transparent protective case can effectively prevent static interference from the hand and prevent accidental short circuit.
  • WARRANTY:DSD TECH back this FTDI FT232RL USB to TTL UART adapter with 12 months warranty.If you meet any question, please contact us, we will fix your issue within 24 hours.

DSD TECH USB to TTL Serial Adapter with FTDI FT232RL Chip Compatible with Windows 10, 8, 7 and Mac OS X

DSD TECH USB to TTL Serial Adapter with FTDI FT232RL Chip Compatible with Windows 10, 8, 7 and Mac OS X

    Features:

  • With this USB to TTL adapter, you can establish communication with your board/MCU through your computer. Maximum transmission speed up to 3Mbps
  • The main chip is FT232RL from FTDI ,High stability. LED indicator for TX,RX,Power,It is very useful when you are debugging or downloading.
  • Pin Definition: CTS,RTS,RXD,TXD,GND,VCC;Support VCC output 3.3V and 5V, switch by jumper.
  • Works with Windows 10, 7(32/64bit) Vista 2008, XP, 2003,Mac Etc.
  • WARRANTY:We back this FDTD USB to TTL Converter with 12 months warranty.If you meet any question, Please contact us, We will fix your issue within 24 hours.

IZOKEE 2pcs 3.3V 5V FT232RL FTDI USB To TTL Serial Converter Adapter Module for Arduino Mini Port

IZOKEE 2pcs 3.3V 5V FT232RL FTDI USB To TTL Serial Converter Adapter Module for Arduino Mini Port

    Features:

  • Support both 3.3V and 5V;
  • Pin Definition: DTR,RXD,TX,VCC,CTS,GND; RXD/TXD transceiver communication indicator
  • USB power has over current protection, using 500MA self-restore fuse
  • Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit /Vsita/, Do not Support Win8

SparkFun FTDI Basic Breakout – 5V

SparkFun FTDI Basic Breakout - 5V

    Features:

  • Now uses a SMD 6-pin header on the bottom, which makes it smaller and more compact.

TinySine Micro USB FTDI Basic Breakout Module for Arduino 3.3V/5V

TinySine Micro USB FTDI Basic Breakout Module for Arduino 3.3V/5V

    Features:

  • 3.3V/5V adjustable

2pcs FT232RL FTDI Mini USB to TTL Serial Converter Adapter Module 3.3V 5.5V FT232R Breakout FT232RL USB to Serial Mini USB to TTL Adapter Board for Arduino

2pcs FT232RL FTDI Mini USB to TTL Serial Converter Adapter Module 3.3V 5.5V FT232R Breakout FT232RL USB to Serial Mini USB to TTL Adapter Board for Arduino

    Features:

  • Chipset: FT232RL, not genuine FTDI chip, Working Voltage: 3.3V/5.5V
  • RXD/TXD transceiver communication indicator, with 500MA self-restore Fuse
  • Pin Definition: DTR,RXD,TX,VCC,CTS,GND
  • Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit /Vsita/, do not Support Win8

USB to TTL Adapter, USB to Serial Converter for Development Projects – Featuring Genuine FTDI USB UART IC ‘FT232RL’

USB to TTL Adapter, USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC ‘FT232RL’

    Features:

  • Built-in a new and original FTDI IC device ‘FT232RL’, which handles all the USB signalling and protocols. TTL levels of +5V and +3.3V adjustable design, and draws power directly from your PC/laptop via the USB connection, no need for an external power adapter
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND connections; POW(power), RXD/TXD transceiver communication LED indicator design, which can show serial adapter status and data activity at a glance
  • Windows 8 and above OS, Linux and Mac OS will install FTDI driver automatically, but NOT compatible with Chrome OS. For details of OS compatibility and installation guidance, please scroll down this page and take a look at ‘Product description’
  • Typical applications: USB to RS232/RS422/RS485 converters, Support EEPROM, Vendor ID re-write, unbrick routers and Mprog3.5, interface to GPS modules, flash firmware on hard drive, update transmitter, interface to set top box and more
  • What you get: 1 x Moyina USB to TTL Module + 1 x Jumper + 10 x Dupont Cables (7.9”, female to female), which are packed by antistatic bag. We offer 1 year guarantee on product, your satisfaction is our passion

Sabrent USB 2.0 to Serial (9-Pin) DB-9 RS-232 Adapter Cable 6ft Cable [FTDI Chipset] (CB-FTDI)

Sabrent USB 2.0 to Serial (9-Pin) DB-9 RS-232 Adapter Cable 6ft Cable [FTDI Chipset] (CB-FTDI)

    Features:

  • Cable Length: 6 ft cable
  • Side Connectors: Male Thumbscrews
  • Supports remote wake-up and power management – No IRQs, no IRQ conflicts
  • Provides a 96 byte buffer for each upstream and downstream data transfer
  • Compatible with USB Specification v1.1(0) & USB CDC v1.1, USB 2.0

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header, Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header, Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

    Features:

  • Moyina USB TTL +3.3V levels (signals only, VCC= +5V, TXD, RXD voltage is 3.3V) Serial cable is a range of USB to TTL serial UART converter cables featuring original and genuine FTDI’s FT232RL USB to serial UART interface IC device which handles all the USB signalling and protocols
  • Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write, debrick Netgear routers and Mprog3.5; Support FTDI VCP driver and D2XX driver
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved
  • Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in ‘Product description’ by scrolling down this page
  • The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch connector. The length of the cable is 6ft(1.8m) and UL ‘E326510’ certified

As an Amazon Associate I earn from qualifying purchases.

Random products:

kwikset deadbolt
kwan loong oil