EPEVER 40A MPPT Solar Charge Controller 12V 24V Auto, 40 amp Negative Grounded Solar Charge Controller MPPT Max Input 100V, 520W/1040W for Lead-Acid, Lithium Batteries and Load Timer Setting
- Negative Ground Controller featuring advanced MPPT technology with high tracking efficiency up to 99.5% and peak conversion efficiency of 98%. Maximizing the energy from solar panels to charge your system.
- MPPT Charge Controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
- 40A Solar Charge Controller charging process has been optimized for long battery life and improved system performance.It includes a 4-stage battery charging (Bulk, Boost, Float, and Equalization) and temperature compensation increase your battery life and improve your system’s performance
- Solar Controller MPPT support PC software,APP and MT-50. Auto identifying 12V/24V DCsystem voltage.Also compatible with various Deep Cycle battery options: Sealed, Gel, Flooded and Lithium. Multiple load control method,
- MPPT Controller 40a with blackligh LCD screen for displaing system information and working condition. Die-cast aluminum design allows for efficient heat dissipation.
EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter + Temperature Sensor PC Monitoring Cable[Tracer4215BN]
- Negative Grounding MPPT Solar Charge Controller Tracer4215BN, The Advanced MPPT Control Algorithm makes this 40 Amp MPPT Controller Tracking Efficiency higher than 99.5%
- 150V Max PV Input Allow this Charge Controller Handles More Solar Panels Wiring in Series to minimize PV current, 5 x 12V Solar Panel Connecting in Series will be applicable
- Work with all Lead Acid Batteries, Sealed AGM GEL and Flooded Battery, User mode allows buyer setting their own charging parameters.
- RS-485 communication bus interface and Standard MODBUS interface available to meet various communication requirements, Temperature Sensor and PC monitoring Cable Attached
- This 40 amp MPPT Solar Panel Charger works with 600W Solar Panel on 12V Battery System and 1200W on 24V Battery. Max Solar Panel 1560W, multiple load mode allow you set the load on/off in different situation. A Solid State Relay is recommended if you are using a Power Inverter
EPEVER MPPT Charge Controller 40A 12V / 24V Auto, Solar Charge Controller 150V PV Negative Grounded Solar Regulator for Gel Sealed Flooded Battery（Tracer 4215BN）
- Advanced MPPT technology High tracking efficiency no less than 99.5% Peak conversion efficiency of 98% Accurately recognizing and tracking of multiple power point
- 12V/24VDC automatically identifying system voltage.User programmable for 3 battery types: sealed, gel and flooded. Multiple load control method, automatic limit for maximum PV input power, ensuring no overload, more safty for using
- Come with remote meter MT-50, be convenient for real-time data viewing and parameter setting. Battery temperature compensation function, real-time energy statistics function
- Electronic protections: PV reverse polarity protection, PV short circuit protection, PV over current alarm protection, Battery overcharge protection, Battery over discharge protection, Battery reverse polarity protection, Load short circuit protection, Load overload protection, Controller overheating protection
EPEVER MPPT Solar Charge Controller 40A 12V/24V Auto Common Negative Grounding with LCD Display Max PV 100V Solar Panel Battery Charging Regulator for Gel Flooded Sealed Lithium Battery (40A MPPT)
- EPEVER MPPT Charge Controller 40Amp Tracer4210AN , 12V/24V Auto Work , Common Negative Grounding .New Released Tracer-AN MPPT solar charge controller is upgrade version then Tacer-A series , Better funcations and advanced technology , Support lead-acid batteries and Lithium Batteries too . More Safety Protection.
- Advanced MPPT technology, with efficiency no less than 99.5% ,Ultra-fast tracking speed and guaranteed tracking efficiency,Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time ; Wide MPP operating voltage range,High quality components, perfecting system performance, with maximum conversion efficiency of 98%,Accurate recognition and tracking of multiple-peaks maximum power point ;
- International famous brands of ST and IR’s components of high quality and low failure rate are used, which can ensure the product’s service life ,Charging power and current limitation function,
- Compatible with lead-acid and lithium-ion batteries,Battery temperature compensation function（only for Lead-acid battery）, Real-time energy statistics function,Overheating power reduction function;Multiple load work modes, The communication port adopts professional protection chip,With RS-485 communication bus interface and Modbus communication protocol.Monitor and set the parameters via mobile phone APP or PC software,Full-load operation without any drop in capacity within the range of working
- (1 X Temperature sensor as free gift ) (We have team and stock in Chicago US , Please feel free to contact with our team for techanical support , our engineer could help you find solution and solar system suggestion
EPEVER 40A Solar Charge Controller MPPT 12V / 24V Auto Max.PV 100V Input Negative Ground Solar Panel Charge Regulator with MT50 Remote Meter Temperature Sensor RTS & PC Communication Cable RS485
- Negative Grounding MPPT Solar Charge Controller Tracer4210AN, The advanced MPPT control algorithm makes this 10 amp MPPT controller tracking efficiency higher than 99.5%.
- Built-in LCD screen displays key charging parameters. Multiple connectivity options for the controller (remote meter, mobile app, PC software etc) enable the user to personalise each charging stage, create a user-defined battery type with specific parameters and access exclusive settings.
- Compatibility with multiple battery types for convenient use, support Sealed lead acid, gel, flooded, lithium and users. Suitable for solar panels up to 520W (12V battery or battery bank) or 1040W (24V system). Current limiting function (10A) allows possibility of adding more solar panels in the future.
- RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations.
- With Modbus communication protocol interface, full-load operation without any drop in capacity within the range of working environment temperature, it is convenient for customers to expand applications and monitor in various fields like telecommunication base station, household system, street lighting system, wilderness monitoring system, etc.
EPEVER MPPT Charge Controller 40A 12/24/36/48V Auto Solar Panels Max PV 150V Common Negative Ground Solar Regulator LCD Display for Gel Sealed Flooded Lithium Type (XTRA4415N)
- ★Newest Release EPEVER MPPT solar charge controller 40A (XTRA4415N-XDS2) , 12V/24V/36V/48V Auto , Max PV 150V , Common Negative Grounding , Advanced MPPT Technology with High Tracking Efficiency up to 99.5% and Peak Conversion Efficiency of 98%. Maximizing the Energy From Solar Panels to Charge your battery for off-grid photovoltaic systems.
- ★Max PV input power 520W charge for 12V battery system ,or 1040W charge for 24V battery system, or 1560W charge for 36V battery system, or 2080W charge for 48V battery system . Common negative grouding designed of this 40Amp mppt controller can be widely used for different applications, e.g., communication base stations, household systems, street lighting systems and field monitoring, RV solar system etc.
- ★7 battery type selection Sealed(AGM), Gel, Flooded, Lead-acid User, LiFePO4 Lithium, Li(NiCoMn)O2 Lithium, Lithium User(9~34V). Four stages of charging(bulk, absorption, float, Equalization) and all-around electronic protection prolong the lifecycle of batteries.
- ★Three different color LED indicator and LCD display show your PV/Battery/Load working Status more intuitive; Five button to adjust and browse system’s parameters in more simpler way, (More parameters setting by MT50 remote meter or eBOX adapter APP or PC software).
- ★Real-Time energy statistic function, View/modify working parameters via MT50 or APP or PC software via RS485 interface. Protection Built-in Against Reverse Polarity, Overcharging, Over-discharging, Overload, Short-circuiting, and Reverse current. It Protect the Battery from being Over-charged by the Solar Modules and Over-discharged by the Loads.
EPEVER 40A MPPT Solar Charge Controller Tracer BN Series Negative Ground 40 Amp Solar Panel Charge Controller 12V/24V Auto Identifying Intelligent Regulator Max. PV 150V
- Advanced MPPT (Maximum Power Point Tracking) technology, Tracking efficiency no less than 99.5%, Maximum conversion efficiency of 98%.
- Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance. Wide MPP operating voltage range. Die-cast aluminum design, ensuring excellent heat dissipation characteristic.
- 12/24VDC automatically identifying system voltage, and has multiple load control modes: manual control, light ON/OFF, light ON+Timer and time control, support 4 charging options: Sealed, Gel, Flooded and User.
- Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting, and support software upgrade.
- With Modbus communication protocol interface, it is convenient for customers to expand applications and monitor in various fields like telecommunication base station, household system, street lighting system, wilderness monitoring system, etc.
EPEVER MPPT Charge Controller 40A 12V/24V Upgrade Tracer4210AN + Remote Meter MT50 Monitor + RTS for Solar Panel Charge Controller Regulator with LCD Display (Tracer4210AN + MT50+RTS)
- EPever 40A MPPT Charge Controller + MT50 Remote Meter + Temp Sensor Cable RTS300R47K3.81A . 40Amp Controller 12V/24V Auto Work , Max. PV input power:520W/12V, 1040W/24V. Max PV voltage of 100V. Common Negative grounding , Compatible with lead-acid and lithium-ion batteries .Fast shipping from US stock , Any questions please contact our team .
- 40Amp MPPT Charge Controller 99.5% Efficiency , 12V/24V Automatic Work System Voltage Recognition Auto-saving function: two voltage disconnect levels ,Charging power and current limitation function
- Common Negative Ground, Max.PV 100V , Max input power: 12V/520W, 24V/1040W
- Compatible with lead-acid and lithium-ion batteries ,Battery temperature compensation function（only for Lead-acid battery) , Overheating power reduction function
- MT50 Remote Meter Automatic identify the controller, and display relevant parameter data , Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control
EPEVER 40A MPPT Solar Charge Controller 12V/24V Auto Working Max.PV 150V Solar Panel Charge Regulator Tracer BN Series Negative Ground Solar Controller
- 12/24VDC automatically identifying system voltage, 150V Max. PV Open Circuit Voltage. Die-cast aluminum design, ensuring excellent heat dissipation characteristic.
- Advanced MPPT (maximum power point tracking) technology, tracking efficiency no less than 99.5%, maximum conversion efficiency of 98%.
- Support 4 charging options: Sealed, Gel, Flooded and User.(Lithium battery charging is supported, but it must be ensured that the battery is never exhausted. The controller does not have a self-activation function for lithium batteries.)
- Solar Panel Charge Regulator with RS485 interface , it can be monitored by cellphone APP(eBox required), PC Software and MT50 remote meter. available to meet various communication requirements in different situations.
- MPPT Solar Regulator can be widely used for various applications, e.g. solar RV, household system and industrial field monitoring, etc.
EPEVER MPPT Charge Controller 40A 12V/24V Auto Solar Charge Regulator Max PV 150V Solar Panel 520W/12V;1040W/24V Charging for Sealed, AGM, Gel, Flooded and Lithium Battery (40A,Triron4215N)
- EPEVER MPPT charge controller 40A ,12V/24V Auto work , Max PV 150V ,Max PV input power 520W/12V or 1040W/24V, Common Negative Grounding.Triron4215N is an upgrade version of Tracer A/AN Series, can be integrated with different display and interface modules to meet a variety of functional requirements. Can automatically identify and load the drivers of various modules.
- Negative groud designed of this 40 Amp modual mppt controller can be widely used for different applications, e.g., communication base stations, household systems, street lighting systems and field monitoring, RV solar system etc.
- 7 battery type selection Sealed(AGM), Gel, Flooded, Lead-acid User, LiFePO4 Lithium, Li(NiCoMn)O2 Lithium, Lithium User(9~34V). Dual 5V DC USB output interface of this mppt controller can charge your electronic devices directly.
- Real-Time energy statistic function, View/modify working parameters via APP or PC software via RS485 interface.(Optional). Four stages of charging(bulk, absorption, float, Equalization) and all-around electronic protection prolong the lifecycle of batteries.
- Three Indicator with different color show your PV/Battery/Load working Status more Intuitive; FIve Button to adjust and browsing system’s parameters in more simpler way. Our local warehouse and aftersale engineer team in USA solve all your questions about off-grid solar system .
As an Amazon Associate I earn from qualifying purchases.