ALMOCN 6PCS DRV8825 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer RepRap RAMPS 1.4,Purple

ALMOCN 6PCS DRV8825 Stepstick Stepper Motor Driver Module with Heat Sink for 3D Printer RepRap RAMPS 1.4,Purple

    Features:

  • A simple steps and direction control interface
  • Maximum 45 V supply voltage
  • Six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step
  • Over-temperature thermal shutdown, overcurrent shutdown, undervoltage lockout
  • 4-layer, 2 oz copper PCB for improved heat dissipation

HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

    Features:

  • DRV8825 Stepper Motor Driver Module
  • 45 V maximum supply voltage
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Can interface directly with 3.3 V and 5 V systems
  • Simple step and direction control interface

KINGPRINT DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988 (Pack of 5pcs)

KINGPRINT DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988 (Pack of 5pcs)

    Features:

  • -The module has a pinout, it can be used as a better performance of the pull-down menu board replacement in many applications
  • -DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step)
  • -It uses 8.2 – 45 V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling)
  • -Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
  • -Built-in voltage regulator (the need for any external logic supply voltage)

ARCELI 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

ARCELI 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

    Features:

  • DRV8825 Stepper Motor Driver Module
  • 45 V maximum supply voltage
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Can interface directly with 3.3 V and 5 V systems
  • Simple step and direction control interface

Aoicrie 5pcs DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988 StepStick

Aoicrie 5pcs DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988 StepStick

    Features:

  • This DRV8825 Stepper Motor Driver Module is upgrade of A4988 Simple step and direction control interface ,It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates,It uses 8.2 – 45 V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling)
  • Stepper Motor Driver (Header Pins Soldered) is a breakout board for DRV8825 microstepping bipolar stepper motor driver,Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay), Built-in voltage regulator (the need for any external logic supply voltage)
  • The module has a pinout, it can be used as a better performance of the pull-down menu board replacement in many applications,Could be operated from 8.2V to 45V and can deliver up to approximately 1.5A per phase. It comes with 0.1″-pitch male header pins installed
  • DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step),Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step

Witbot DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer RP1.4 A4988(Pack of 5pcs)

Witbot DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer RP1.4 A4988(Pack of 5pcs)

    Features:

  • 1.It is upgrade of A4988, 4-layer PCB for improved heat dissipation and decrease chip resistance.
  • 2.The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough.
  • 3.Stepper Motor Driver (Header Pins Soldered) is a breakout board for DRV8825 microstepping bipolar stepper motor driver.
  • 4.Could be operated from 8.2V to 45V and can deliver up to approximately 1.5A per phase. It comes with 0.1″-pitch male header pins installed
  • 5.Six different stepping resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step,1/32-step

Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs

Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs

    Features:

  • The A4988/DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt.
  • The position where the jumper hits the ON DP indicates 16 subdivisions (4988) or 32 subdivisions (8825).
  • Jm connects the motor.
  • Jv connects 5V and 12V-24V power supplies.
  • Jc’s E\S\D\G corresponds to the Enable\Step\Dir\Gnd drive signal output on the connection.

Pololu DRV8825 High Current Stepper Motor Driver Carrier (Item: 2133)

Pololu DRV8825 High Current Stepper Motor Driver Carrier (Item: 2133)

    Features:

  • This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step)
  • Operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling)
  • This board ships with 0.1″ male header pins included but not soldered in

As an Amazon Associate I earn from qualifying purchases.

Random products:

dentist gifts
delta acrylic paints