Monstrum Tactical Low Profile Dovetail to Picatinny/Weaver .22 Airgun Rail Adaptor
- Dovetail to Picatinny rail adaptor for firearms equipped with 11mm or 3/8 inch dovetail standard
- Dovetail rails typically found on air rifles or certain model .22 rimfire rifles
- Picatinny rail allows for the mounting of Picatinny or Weaver standard scopes, red dots,
- Rail adaptor installs easily via dovetail mount and one vertical stop pin
- 2.8 inches at the base, the Picatinny rail extends 3.9 inches allowing for more flexible optics
Ulightfire Low Profile Rail Adaptor 20mm to 11mm ，96mm in Length
- 【Function】 This low profile rail adapter is an excellent conversion of 20mm base to 11mm without causing any height raising
- 【Low Profile& Design】 Low profile rail adaptor with spring loaded allows repeatable/consistent alignment and removable stop pins for secure installation .Constructed with aluminium alloy which is sturdy and durable.
- 【Easy Installation】 This rail adaptor with spring tension retraction expansion design easily to snap into picatinny or weaver base
- 【Specification】 Size approximately 46mmX22mmX6mm;Weight: 16g
- 【Your Attention】Owing to its slim ,extra low profile and lightweight design, this products may give an impression of not that sturdy .Therefore we suggest you to confirm whether these rail adapters are suitable for your use or not before you order it.Should there be any problem on spring loosen etc. please kindly contact us ,and a satisfying solution will be made for you .
LONSEL Dovetail to Picatinny Rail Adapter, 11mm Dovetail to 21mm Picatinny/Weaver Rail Convert Mount – Low Profile Scope Riser Rail Adaptor – Base Mount 3/8″ to 7/8″ Converter – 2 Pack
- ✌ Precision Material – Premium out of aircraft grade aluminum alloy and black hard coat anodize finish, sturdy & durable.
- ✌ Convert 11mm Dovetail to 21mm Picatinny Rail – 2.94 inches length at the base, the picatinny rail extends 3.94 inches allowing for more flexible optics placement.
- ✌ Mount Base – Fit 11mm dovetail mounts, Base mount 3/8″ to 7/8″ converter adapter. Low profile 0.5″ riser rail for scope.
- ✌ Top With 9 Slots Weaver Style Rail – Top 21mm picatinny rail allows for the mounting of picatinny or weaver standard scopes, red dots or other accessories.
- ✌ Easy To Install – Rail adaptor installs easily via dovetail mount and one vertical stop pin, attached allen wrench can help you to tight stable and no shaking.
ulightfire 2 Pack Rail Adaptor 20mm Convert to 11mm Riser Rail Mount Picatinny/Weaver Mount Rail
- 20 mm width rail suitable for attaching a flashlight, dot site, scope etc. to your equipments.
- It’s possible to install it on a 20 mm dovetail rail with the wrench attached.
- Made with lightweight aluminum precisely , light weight and durability is guaranteed.
- Material: Aluminum alloy; Size: 39X21X13 mm ;Weight: Approx 55 g
MAPLON 2PCS Dovetail to Picatinny Rail Adapter 11mm to 20mm Picatinny Rail Low Profile 2PACK
- Precision machined out of premium T6-6061 aircraft aluminum alloy.
- Can be used to convert 11mm to 20mm. Rail adaptor installs easily via dovetail mount and one vertical stop pin
- 2.8 inches at the base, the Picatinny rail extends 3.9 inches allowing for more flexible optics placement and eye relief.
- Fits 11mm or 3/8 inch dovetail mounts, rails and bases as typically found on air rifles, paintball markers, certain model .22 rimfire rifles and crossbows
- Rail allows for the mounting of Picatinny or Weaver standard scopes, red dots, magnifiers, or other optics
TPO 3/8″ 11MM to 7/8″ Dove Rail to Picatinn Adaptor Mount, Low Profile Dovetail to Picatinny Rail Adapter 11mm to 20mm Picatinny Riser Mount
- Fits onto Dovetail Rail – Fits 9mm up to 15mm
- Fit airgun/shotgun dovetail rails
- Picatinny rail allows for the mounting of Picatinny or Weaver standard scopes, red dots
- Height: 0.67″ ; Width: 1.02″ ; Length: 3.9″ ; Weight: 2.4 OZ
- 6061-T6 aluminum alloy, high quality material
Higoo Riser Converter 4.9″ 11mm Dovetail to 20mm Picatinny Weaver Mount Adapter 10 Slots 124MM
- Fits 11mm rail.
- Total Length:124mm/4.9″ approx.
- Top Picatinny width: 20mm/0.79″ approx
- Bottom dovetail width: 11mm/0.43″ approx.
- Material: Aluminum alloy.
Sparwod 20mm to 11mm Weaver Picatinny Base Dovetail to Picatinny Adapter Rail, Aluminum Alloy Scope Riser Rails Mount Adapter
- ❖Picatinny/Weaver to Dovetail Adaptor:All Matte Black finish,Great for outdoors, hunting, shooting and etc.
- ❖Quick installation:Allow installation of Aiming Devise without removing carry handle,20mm Standard Weaver Base take any scope mounts.
- ❖Fits dovetail 11mm:Bottom dovetail width is 0.43″,Bottom dovetail width is 0.78″ ;Can be used to convert 20mm to 11mm.
- ❖Lightweight&Durable:Constructed by high quality aluminum alloy,Wear-resistant,anti-fall, anti-corrosion,each mount just 25g weight.
- ❖Guarantee:If you are not completely satisfied, please contact us and we will refund or replace 100% within 30 days after purchase. We are committed to providing the highest standard of customer service for every customer.
Persei Low Profile 3/8 inch Dovetail to Picatinny Rail Adaptor
- ★ Picatinny rail allows for the mounting of Picatinny or Weaver standard scopes, red dots.
- ★ 2.8 inches at the base, the Picatinny rail extends 3.9 inches allowing for more flexible optics.
- ★ Dovetail to Picatinny rail adaptor for firearms equipped with 11mm or 3/8 inch dovetail standard.
- ★ Dovetail rails typically found on air rifles or certain model .22 rimfire rifles.Crafted from lightweight aluminum, the rail is only 2.3 ounces in weight.
- ★ Rail adaptor installs easily via dovetail mount and one vertical stop pin.
MEOPTEX Riflescope Mount Release Rings Mounts Two Piece 9-11mm to Weaver Rail Adapter
- “MeOptex 2 piece 3/8″”mm Dovetail Base to Weaver/Picatinny base Adapters low profile
- Overall 3″” (76mm) long – both of them – 1.5″” each
- 11mm airgun dovetail to Weaver Adaptor – 2 Piece – in Matt Black
- 0.37″” / 9.5mm total height
- 0.19″” / 5mm base to top of plate”
As an Amazon Associate I earn from qualifying purchases.