4 Axis 500Khz Offline Stand Alone CNC Motion Controller System PLC G code Servo/Stepper Motor Control Replace Mach3+100PPR MPG Handwheel with emergency stop for CNC Router Engraving Machine DDCSV3.1
- Model Number:DDCS V3.1 ; 5 inches TFT screen, resolution ratio: 480×272,17 operation keys
- 16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs;
- USB flash disk support for G code file input,no size limited of the G-code file ;ARM9 main control chip,FPGA core algorithm chip;
- The Power Supply for the controller is 24VDC,DDCSV3.1 needs two power supplies,main power is for system,IO port is for input and output ports, Current is not less than 1A;Because of the IO power,system can supply the power for all IO ports.So no need the external power supply for IO port anymore;
- MPG Resolution:100PPR;Switch:X1,X10,X100;DDSCV3.1 Version enhenced Algorithm,support soft interpolation,fixed arc interpolation bug of the old version;Support standard MPG; Jog function for each axis (continuous, step, defined distance);Customer can define the distance;
SainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO
- This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module.
- Software: GRBL controller, UniversalGcodeSender.
- Stepper motor drive: DRV8825; Spindle power: 150W; Input voltage: 24V (12-24V).
- Support XYZ three-axis control, spindle, laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface ” + s-“).
- Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57).
4 Axis 500KHz Linkage Offline Motion Controller System PLC Control G code+100 Pulse Handwheel MPG with Emergency Stop for CNC Router Engraving Milling Lathe Machine RMHV3.1
- Model Number:RMHV3.1;size:163x102x45mm;
- Controller name:4 axis CNC Offline Controller 4 Axis 500Khz G Code Breadout Board Engraving Machine Control System Card
- 4.3 inches TFT screen, resolution ratio: 480*272;Input power:24~32VDC;Output power:0-10V;Power Supply:DC
- Rated Power:500KHz;MPG Resolution:100PPR;17 operational keys;Support the USB flash disk to read the G code,and the size of G codefile has no requirement;The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.
Centroid 4 axis Acorn DIY CNC motion controller kit (REV 4) with CNC software, replaces MachMotion,WinCNC,Mach3,EMC2,KCAM4,Smooth Stepper
- 4 axis CNC Controller kit for Mill, Lathe, Router, and other specialty CNC machine tools
- On-board motion control CPU (Beagle Bone Green ARM cortex A8) with Ethernet communication to the CNCPC
- 8 inputs 8 outputs, Easy CNC Setup Wizard, Legacy DB25 connector, command stepper motors and AC brushless motors
- Runs on Centroid industrial Mill and Lathe CNC software (Windows 10), Touch Screen Compatible Operators Control panel. Three Software Levels, Free (50Kb file size limit), Pro and Digitizing Bundle see website for full details. User editable Virtual Control Panel.
- Spindle Encoder input, VFD Spindle control analog output, Industrial CNC features at DIY price
CNC Offline Controller, Offline Control Module with Touchscreen LCD GRBL Control for FoxAlien 3018-SE, LE-4040 CNC Router Engraving Machine
- Compatible with FoxAlien 3018-SE and LE-4040 CNC engraving machines.
- Touchscreen Control, simple and easy.
- SD Card Included. Testing files are included in the SD card. You can start engraving once you receive the module.
- The offline controller functions as the control software in computer. It can control all actions of the machine.
- This offline controller can free your computer when it needs for long hours engraving.
SainSmart 3-Axis GRBL USB Driver Controller Board DIY Engraver Control Board for GRBL
- Applicable Software: GRBL control, Un Gcode Sender, GRBL controller, or other software that supports GRBL code
- Stepper Motor Drivers: A4988 motor driver,16 microstep 1.5A phase current output
- Support Stepper Motor: NEMA17 NEMA23 stepper motor, phase current less than 1.5A
- Spindle Motor Interface: the maximum support 400W DC spindle motor
- With fan interface and TTL signal output interface (for controlling the laser module with TTL module)
4 axis CNC Controller,TC5540H USB G Code and M Code Spindle Control Panel MPG Stand Alone Lathe milling Machine Controller for Welding Equipment
- 【High quality】–This 4axis CNC controller adopts good quality plastic,100% brand new and high quality,very durable
- 【Clear Portrait】–The LCD display controller has 3.5 inch color LCD display screen,which can provide you a clear reading 3.5 inch color LCD,and the pixel is 320*240,can give you a good visual effect
- 【Practicality】–This 4axis CNC controller supports both servo and stepper motor and support round,division,degree,inch etc.
- 【External Manual Operation】–Click to rotate clockwise counterclockwise,you can manually adjust the start,pause,alarm and stop,it is very convenient to operate
- 【Widely Used】–The LCD display controller is suitable for welding equipment,dispensing equipment,painting equipment,grabbing equipment,feeding equipment,cutting equipment,machine tools, etc.
3 Axis GRBL 1.1f USB Port CNC Engraving Machine Control Board Engraver Milling Machine Controller board
- Name:Updated USB Port 3Axis GRBL 1.1f Control Board V3.4
- Input voltage: 12-24VDC (recommend 24VDC)
- Support software: GRBL Contol/Candle(3 axis)/Universal Gcode Sender;Support System:Windows XP/7/8/10
- Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57);Support spindle:24V 2A Support Spindle PWM speed (0%-100%)
- Master chip: atmel 328P (arduino nano)；
RATTMMOTOR 4Axis Mach3 USB Stepper Motor Controller Board CNC Motion Control Card for CNC Rounting Engraving Milling Machine
- Model Name: Mach3 USB Motion Card; 4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives.
- This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify.
- Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.
- If you are not familiar with the product and software features, make sure the machine’s power switch on hand, you can quickly turn off the power. Recommends that users install the emergency stop button and make sure the button is functioning properly.
NVCM 4 Axis CNC Controller Ethernet MACH3 Motion Control Card Double-Isolation USB Interface Board Card for Stepper Motor
- ★Double-Isolation MACH3 CNC Motion Controller: There has two isolation types of this MACH3 CNC Motion Controller, they are DCDC electrical isolation and Optocoupler isolation
- ★16 Programmable Input & Output Interfaces: With 16 programmable input interfaces, the motion control card can be configured with functions such as limit emergency stop, the output can be configured as controlled peripherals such as water cooling and fog cooling
- ★Equipped with interface: With 1 channel standard manual pulse MPG interface, Our 4 Axis CNC controller has PWM output control of spindle as well as aluminum alloy enclosure USB interface, support MACH3 software
- ★Excellent Working Performance: This USB interface board card can control 4 stepper motor running at the same time maximally. The maximum output pulse of 125K stepper motor is suitable for most machine tool systems
- ★Regulatory Compliance: This CNC controller board is entitled with high performance according to strict rule. The board is designed and manufactured according to international standard, strictly follow factory quality control
As an Amazon Associate I earn from qualifying purchases.