CDHPOWER 10pcs 1″ Threadless Bicycle Headset Combo- Gas Motorized Bicycle (Black)
- CDHPOWER 10pcs 1 ” Threadless Bicycle Headsets
- Compatible with 30mm Head Tube and 25.4mm Fork;
- Diameter:1″*30*27; Height:22mm
- Material:Alloy and steel / Finish:CP/ED black
- Bearing: Caged (5/32″*16*2pcs) This product Comes with 12months Warranty. Any questions,please contact us firstly! we can help you solve the problem until you are satisfied.
CDHPOWER 2 Stroke PK80 Motor-Silver Color Engine-Gas Motorized Bicycle 66cc/80cc
- This item iMOTOR ONLY, pay attention on it before shopping. CDHpower 2 Stroke Gas Bicycle Motor Engine PK80 66cc/80cc; Bore and Stroke 47mmx40mm; better adjusting Clutch a little before riding
- High hole Piston and Long connecting rod;Wide front mount; 8mm bolts to front and rear bolts;Allen bolts on motor;
- Slant head; 40mm alum intake stud spacing; manual EXCLUDED
- Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders;fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen; Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder
CDHPOWER New Performance Head for 2 Stroke Engine Kit 66cc/80cc
- Higher performance Casting head for 2 stroke kit 80cc/66cc
- Fully casting made; Alum Design
- The casting cylinder head increases the horse power of your 80cc / 66cc 2-Stroke Bicycle Engine and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine.
- Not for 48cc/50cc 2 stroke cycle gas motor engine bike kit
- Height Max:51mm-52mm; Width from 115mm to 123.5mm; This product Comes with 12months Warranty. Any questions,please contact us firstly !we can help you solve the problem until you are satisfied.
CDHPOWER Imporved Silver CNC Universal Motor Mount-Suit for 3.4L Felt Faker Gas Frame – Gas Motorized Bicycle 48cc/66cc/80cc
- Inner Diameter: 1.65″ (42.5mm);Compatible with all brand 2 stroke motors no matter how wide or small the front mount it is
- Suitable for front mount with bolt 6mm and 8mm (2 in 1);
- Suitable for CDH YD100 Engine and CDH PK80 Engine;Suitable for CDH 3.4L felt faker Gas Frame
- For 66cc/80cc and 48cc 2-stroke bicycle engines Universal Mount for Bike Motors This universal mount helps mounts your bike motor to bigger down tubes
- Works on most newer bicycles and allows you to mount the motor without drilling through the frame.
CDHPOWER 26″ Aluminum Mag Wheels/Black/Bicycle Wheel/Rim – 66cc/80CC 2 Stroke Gas Motorized Bicycle
- Please note：excluding bolts, size of Bolts to mag wheel:M5x23mm, if your sprocket is thicker than standard sprocket, we suggest bolts M5x25mm. Designed mainly for motorized bicycles;do not need adapter, sprocket only needed; put grease/lubricating oil on thread of wheel to prevent damage of thread from Riding
- Aluminum Wheels Excluding chain drive Sprocket；Thread size: 1.375 inch X24T
- Size for Wheel Axle: LxT(front axle): 160mm x 10mm; LxT(rear axle): 180mm x 10mm; light and very durable. 26″/26 inch Size Wheel;
- axles included;easy intall sprocket on mag wheel,
- PLEASE NOTE 1: the best safe speed if racing: 35km/h；Attention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this alum wheel, buyer need drill 6 holes in middle to make sprocket fit on the alum wheel or buyer buy CDH multifunctional sprocket which fits well on CDHpower alum wheel
CDHPOWER Bottom End Crank Assembly of Gas Bicycle Engine kit pk80 – Gas Motorized Bicycle 66cc/80cc
- CDHPOWER PK80 Bottom End Crank Assembly of Gas Bicycle Engine kit 66cc/80cc Gas Motorized Bicycle
- Studs/Bolts required: M8x1.25 For all kinds brand 66cc 80cc 2 stroke kit;
- Replacment for 66cc/80cc kit; m8 studs for front and rear mount,wide front mount
- Crank installed well inside of bottom
- It is Complete bottom end crank assembly, easy to install.
CDHPOWER Bottom Bracket for Bicycle Bike Bottom Bracket Parts (Black-XR-BB07)
- CDHPOWER Bottom Bracket for Bicycle Bike Bottom Bracket Parts
CDHPOWER 36T Wide Crank Assembly-3pcs,for 2-Stroke and 4-Stroke Motor Gas Motorized Bicycle 48cc/66cc/80cc
- CDHPOWER Wide Crank w/ 36T Sprocket;Be used on 26″ cruiser style frame;
- This part allows you to convert a 1 piece crank into a 3 piece crank; Compatible with 9/16 inch pedals. Will not be compatible with Micargi Beach Cruiser’s stock pedals.
- Wide cranks are required for 4-stroke and pull start bicycle engine kits 66cc/80cc/49cc
- The length of the pedal crank shaft is about 266mm/10.47inch
- This product Comes with 12months Warranty. Any questions,please contact us firstly! we can help you solve the problem until you are satisfied.
CDHPOWER Yd100 Cylinder 50MM (Two in One),Gas Motorized Bicycle yd100cc
- CDHPOWER YD100 Cylinder 50MM.Two in one cylinder;
- New Design; Inner diameter of cylinder:50mm; Inside wall of cylinder: Electroplated;
- Compatible with YD100 piston kiy and YD100 Bottom End ONLY;Good Replacement for Yd100 motor kit
- Cylinder comes with 40mm Intake Manifold Stud Spacing; Cylinder body Gasket is not included;
- This product Comes with 12months Warranty. Any questions,please contact us firstly !we can help you solve the problem until you are satisfied.
CDHPOWER Mountain Road Bikes Sport Brake Levers V-Brake Set Cables Caliper Kit
- Please Note: Fit for outdiameter 22mm handle bar; Packing list: Aluminum brake lever *2 Brake cable *2 V brake *2；Length of 2 brake cables:75mm front cable&175mm rear cable
- Brake pad has a long-lasting performance of wear-resistant against wheels rotating, They have great stop capability and thus you can stop your bike immediately, which protect you from emergencies.
- Brake one Set( including V Brake for front and rear wheel)-Black
- Apply to : mountain bike, road racing bike,folding bike etc;
- you can stop your bike in no time, which will save your life out of danger when running into an emergency. In the rain, you have to pull lightly on the brakes to dry any residual water on the brake before braking.
As an Amazon Associate I earn from qualifying purchases.