Fender Frontman 10G Electric Guitar Amplifier
- 10 Watts
- 1-6″ Fender Special Design Speaker
- One Channel
- Controls: Gain, Over-Drive Select Switch, Volume, Treble, Bass
- Other Features: 1/4″ Instrument Input, 2-Band EQ, 1/8″ Auxiliary Input Jack for Jam-Along with Media Player or CD, 1/8″ Headphone Output Jack for Silent Practice, Closed-Back Design for Heavier Bass Response
BOSS Audio Systems R1100M Monoblock Car Amplifier – 1100 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control, Subwoofer Amplifier
- Installation – Connect Power/ground to the closest point of chassis of the vehicle. Keep ground wire less than 39” (100 cm) in length. Use 8 gauge or heavier wire. A Mobile Electronics Certified Professional is recommended for installation & safety
- Power – Maximum Power Output of 1100 Watts at 2 Ohms into one channel. Max power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
- High Level Inputs – Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- Low Level Inputs – Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- Low Pass Crossover – A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- Variable Bass Boost – Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- Specs – Dimensions: 9.1” x 0.4” x 2.3”, It can be installed in a variety of different places due to its’ slim and compact design, Weight: 4.43 Lbs. Amplifier Car Audio. Monoblock amplifier
- Warranty – BOSS Audio Systems provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
4 Multi-Zone Stereo Amplifier – 19” Rack Mount, Powerful 8000 Watts with Speaker Selector Volume Control & LED Audio Level Display – 4-Ch. Bridgeable Switches – Pyle PT8000CH
- MULTI-ROOM MUSIC: Let music follow you from room to room. This home audio amplifier supports powering up multiple speakers in the same wired system, so you can listen or dance to the same tune in nearly every room, from just about any source or device you desire
- 8-CHANNEL HIGH POWER AMPLIFIER: 100w per channel deliver high power performance with 5-way speaker binding posts (Banana Plug) outputs, pass-through output for external amplifier linking (Daisy-Chaining) & integrated 4-channel bridgeable switches
- SPEAKER VOLUME CONTROL: This home audio amplifier has speaker selectors with volume control to manipulate the sound of multiple speakers simultaneously. Monitor audio levels with the LED display to check if the output is too loud or too soft
- POWERFUL 8000 WATTS: All channels of this stereo power amplifier support a maximum 1000-watts each in a single rack-mountable unit. Bridge two adjoining channels for high-powered outputs and an earth-shattering sound
- BUILT-IN LOW IMPEDANCE PROTECTION: Individual channels have built-in low impedance protection to prevent damaging the speaker or unit. It shuts down the faulty channels and provides uninterrupted music through the remaining good channels
Winegard LNA-200 Boost XT HDTV Preamplifier, TV Antenna Amplifier Signal Booster, HD Digital VHF UHF Amplifier
- The Winegard Boost XT TV signal booster enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels; works with any passive/non-amplified antenna; antenna required for use with preamplifier
- TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels on any non-amplified outdoor antenna.
- Boost Clear Circuit Technology features the lowest noise figure (1db typical) to deliver more range and reduce signal dropout and pixelation
- Includes Winegard Boost LNA-200 digital TV antenna amplifier, 110v adapter, power inserter, hose clamps and printed documentation. Designed and built in the U.S.A.
- Note: Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used
Audiobank Audio System P5000.1 Monoblock Car Amplifier – 5000 Watt Amp, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control, Subwoofer Amplifier
- 2 Ohm Stable Operation & Soft Turn On Circuit
- Thermal and Speaker Short Protection Circuitry
- Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
- Remote Turn-On / Turn-Off Circuit1
- LED Power and Protection Indicators
Arris 4-Port Bi-Directional Cable TV, OTA, Satellite HDTV Amplifier Splitter Signal Booster with Passive Return And Coax Cable Package – cableTVamps
- The BDA-42-4-PR-R is a Bi-Directional Cable TV Amplifier and over-the-air (OTA) HDTV amplifier designed for use in homes. Boosts signal by 5x in the forward path.
- Compatible with all standard and digital Cable TV services. The amplifier should be installed BEFORE splitters and long cable runs for best results. 1-year warranty.
- Meets all applicable IEEE surge standards for all output ports, which enhances system reliability. Weather seal and protective coating allow use of the amplifier for indoor or outdoor applications. 36″ White connection cable and PCT-TT installation tool included.
- NOT FOR USE WITH SATELLITE DISH SYSTEMS. It will block the signal between the dish and receiver. NOT FOR USE WITH AMPLIFIED ANTENNAS. Using with an amplified antenna may cause total loss of OTA signals. If you antenna comes with any type of power cord, it is amplified.
Sound Storm EV5000D Car Amplifier – 5000 Watts Max Power, 1 Ohm Stable, Class D, Monoblock, MOSFET Power Supply, Remote Subwoofer Control
- POWER: Maximum Power Output of 5000 Watts at 1 Ohms into one channel. Maximum Power output of 2500 Watts at 2 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the EV5000D to your factory radio or aftermarket radio that does not have low-level (RCA) inputs.
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the EV5000D with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. A low-pass filter will primarily keep high notes out of your subwoofer(s)
- VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- DIMENSIONS: The EV5000D is 19.4 inches in Depth, 10 inches in Width and 2.3 inches in Height. It can be installed in a variety of different places due to its’ slim design
- WARRANTY: Sound Storm provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com
Amplifier, Cable TV RF Broadband 15dB Gain One Output 5-1002Mhz w/ Power Adapter
- The micro-housing allows all output ports of the amplifier to be facing down to simplify coaxial cable wiring in NID enclosures or small spaces.
- Patented auto-seizing F-port features a “Cam Activated Mechanism” to provide full contact pressure (>2,000 grams) on the center conductor for maximum reliability.
- True 5-42 MHz return band and full 1 GHz downstream spectrum for more useable bandwidth.
- Unique surge protection on all ports without the use of arc gaps which may cause high impulse noise during discharge.
- Self-resetting circuit protection provides safe protection against short-circuits to minimize maintenance costs.
Rockville dB13 3000 Watt Peak/750w CEA rated RMS Mono 2 Ohm Amplifier Car Amp
- Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
- Rockville dB13 3000 Watt/1500w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.). 2 Ohm: 750 Watts x 1 Channel <1% THD+N. 4 Ohm: 450 Watts x 1 Channel <1% THD+N.
- RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1500 Watts x 1 Channel. 4 Ohm: 900 Watts x 1 Channel. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm: 3000 Watts x 1 Channel. 4 Ohm: 1800 Watts x 1 Channel.
- High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz – 250Hz. Subsonic Filter: 15Hz – 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System.
- RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz – 250Hz. Damping Factor: >150 @ 100Hz. 80 Amp Maxi Fuse. Dimensions: (W x H x L) 9? x 2.4? x 14.7?.
Lepy LP-2020A Class-D Hi-Fi Digital Amplifier with Power Supply Black
- UNIQUE APPEARANCE-All aluminum front-panel by precise CNC machining, all aluminum cover with sand blasting treatment, innovative circle-type power light.
- FEATURES-Overvoltage protection(Over DC14.4V),short-circuit protection, time-delay circuit design to avoid momentary shock damage to speaker boxes.
- State of the art design using surface mount components and advanced engineering for proven performance, reduced signal interference, and long operational life.
- APPLICATION-Be suitable for ipad,cellphone,MP3 player,CD player, dataplay, computer, decoder,etc.
- PRODUCT SPECIFICATION-Size(LxWxH):140x118x41cm,net weight:260g,input power: DC 12~13.5V 3A,output power:20Wx2RMS.
As an Amazon Associate I earn from qualifying purchases.