Rank Product Name Score
1 CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 15g . Ideal for VGA GPU repairs CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 15g . Ideal for VGA GPU repairs
Computer-Systems
9.8 GET ON AMAZON
2 CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 5g Ideal for VGA GPU repairs CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 5g Ideal for VGA GPU repairs
Computer-Systems
9.6 GET ON AMAZON
3 BGA Activated Rosin Solder Paste Tin Rosin-Based Flux Paste Cream for Soldering Rework Station Circuit Board PCB BGA SMD Soldering Repair (80g) BGA Activated Rosin Solder Paste Tin Rosin-Based Flux Paste Cream for Soldering Rework Station Circuit Board PCB BGA SMD Soldering Repair (80g)
DIYPHONE
9.3 GET ON AMAZON
4 CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 10g . Ideal for VGA GPU repairs CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 10g . Ideal for VGA GPU repairs
Computer-Systems
9.0 GET ON AMAZON
5 Relife Low Residue Desoldering Wick Braid No-Clean Solder Flux Remover Wick Cord For Phone BGA Cleaning Repair Tool - 3.5mm Width 2.0M Length Relife Low Residue Desoldering Wick Braid No-Clean Solder Flux Remover Wick Cord For Phone BGA Cleaning Repair Tool – 3.5mm Width 2.0M Length
DIYPHONE
8.6 GET ON AMAZON
6 Beennex Tin Lead Solder Paste BGA Soldering Flux Repairing Tool Accessories Beennex Tin Lead Solder Paste BGA Soldering Flux Repairing Tool Accessories
Beennex
8.5 GET ON AMAZON
7 Brazing Flux-RMA-218 140g Flux Paste BGA Reballing Soldering Repairing Tool Brazing Flux-RMA-218 140g Flux Paste BGA Reballing Soldering Repairing Tool
Leylor
8.2 GET ON AMAZON
8 2.5MM Width 2.0M Length Low Residue Desoldering Wick Braid with Thumb Wheel Dispenser Welding Solder Remover Lead Cord For Phone BGA Flux Welding Cleaning Tool 2.5MM Width 2.0M Length Low Residue Desoldering Wick Braid with Thumb Wheel Dispenser Welding Solder Remover Lead Cord For Phone BGA Flux Welding Cleaning Tool
DIYPHONE
8.0 GET ON AMAZON
9 Huhudde 2 Pcs 10CC RMA-218 BGA Reballing No-Clean Repair Solder Flux Paste With Needles Huhudde 2 Pcs 10CC RMA-218 BGA Reballing No-Clean Repair Solder Flux Paste With Needles
Huhudde
7.6 GET ON AMAZON
10 CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 10g (2 X 5g) Ideal for VGA GPU repairs CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 10g (2 X 5g) Ideal for VGA GPU repairs
Computer Systems
7.4 GET ON AMAZON

CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 15g . Ideal for VGA GPU repairs

CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 15g . Ideal for VGA GPU repairs

    Features:

  • CS-FLUX when heated at around 150 degrees (Celsius) turns into liquid and covers the small gap between the BGA component and the PCB complitelly. This way all solder balls are covered with CS-FLUX and durring reflow or removal of the BGA componets all PCB and componet pads and balls are protected.
  • CS-FLUX is no clean flux but if needed it can be cleaned very easily with alcohol. It causes no corossion on the PCB or components.
  • Thank’s to it’s liquid nature, a very small amount of CS-FLUX is needed for each repair resulting in a much cleaner work enviroment.CS-FLUX is also Lead Free
  • CS-FLUX is very sticky and specially designed to keep the solder balls inside the stencil durring the reballing proccess. It is also ideal for reflow of BGA components (with heatgun) when needed equipment for reballing is not avaliable.
  • CS-FLUX is produced in EU (Greece) and will be shipped to your workshop very fast.

CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 5g Ideal for VGA GPU repairs

CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 5g Ideal for VGA GPU repairs

    Features:

  • CS-FLUX when heated at around 150 degrees (Celsius) turns into liquid and covers the small gap between the BGA component and the PCB complitelly. This way all solder balls are covered with CS-FLUX and durring reflow or removal of the BGA componets all PCB and componet pads and balls are protected from oxydation.
  • CS-FLUX is no clean flux and causes no corrosion if not cleaned, but if needed it can be cleaned very easily with alcohol. It causes no corossion on the PCB or components.
  • Thank’s to it’s liquid nature, a very small amount of CS-FLUX is needed for each repair resulting in a much cleaner work enviroment. CS-FLUX is also Lead Free and halogen free and produces minimum amount of fume .
  • CS-FLUX is very sticky and specially designed to keep the solder balls inside the stencil durring the reballing proccess. It is also ideal for reflow of BGA components (with heatgun) when needed equipment for reballing is not avaliable. Due to it’s liquid nature is perfect for microsoldering even for not experienced technitians.
  • CS-FLUX is produced in EU (Greece). We keep stock all around the world so that it can be shipped to your workshop very fast.

BGA Activated Rosin Solder Paste Tin Rosin-Based Flux Paste Cream for Soldering Rework Station Circuit Board PCB BGA SMD Soldering Repair (80g)

BGA Activated Rosin Solder Paste Tin Rosin-Based Flux Paste Cream for Soldering Rework Station Circuit Board PCB BGA SMD Soldering Repair (80g)

    Features:

  • MECHANIC Advanced Paste Flux Soldering for mobile phone motherboard Repair, electric Soldering Iron Welding Fluxes for phone circuit board repair.
  • Its boiling point only slightly higher than the melting point of the solder, For mobile phones, PC cards and other sophisticated electronic chip-level help welding.
  • High bond strength, PH value neutral, insulation is strong, welding surface smooth, is no corrosive for IC and PCB.
  • Wipe the surface of the object before soldering, apply the paste flux to the solder joint, solder the tin to the solder joint with soldering iron.
  • Specifications: Model: MECHANIC-UV80; Color: Yellow, Weight: 0.08kg; Viscosity: 0.2Pas; Granularity: 0.22um; Packing: Aluminum box.

CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 10g . Ideal for VGA GPU repairs

CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 10g . Ideal for VGA GPU repairs

    Features:

  • CS-FLUX when heated at around 150 degrees (Celsius) turns into liquid and covers the small gap between the BGA component and the PCB complitelly. This way all solder balls are covered with CS-FLUX and durring reflow or removal of the BGA componets all PCB and componet pads and balls are protected.
  • CS-FLUX is no clean flux and causes no corrosion if not cleaned but it can be cleaned easily with alcohol.
  • Thank’s to it’s liquid nature, a very small amount of CS-FLUX is needed for each repair resulting in a much cleaner work enviroment.
  • CS-FLUX is very sticky and specially designed to keep the solder balls inside the stencil durring the reballing proccess. It is also ideal for reflow of BGA components (with heatgun) when needed equipment for reballing is not avaliable.
  • CS-FLUX is produced in EU (Greece) and will be shipped to your workshop very fast.

Relife Low Residue Desoldering Wick Braid No-Clean Solder Flux Remover Wick Cord For Phone BGA Cleaning Repair Tool – 3.5mm Width 2.0M Length

Relife Low Residue Desoldering Wick Braid No-Clean Solder Flux Remover Wick Cord For Phone BGA Cleaning Repair Tool - 3.5mm Width 2.0M Length

    Features:

  • Solder Removal Tool: 1pcs desoldering solder wick, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder
  • Desoldering Solder Wick Braid: Solder braid with the size 3.5mm Width, 2.0m Length, this desoldering wick with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area
  • Hight quality Shell: The body of the desoldering pen shell is made of high quality ABS, which make the solder sucker delicate and durable, make it comfortable to hold, thus it can be used for a long time
  • Weaving Design: Efficiently absorb excess solder when removing tinan solder holes, Adsorption tin paste clean, low residue, suitable for precision circuit board use, reduces the risk of damage to the motherboard
  • Widely Used of Solder Wick: The desoldering solder wick can be used to correct mistakes on PCB board, remove components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on SMD components and more

Beennex Tin Lead Solder Paste BGA Soldering Flux Repairing Tool Accessories

Beennex Tin Lead Solder Paste BGA Soldering Flux Repairing Tool Accessories

    Features:

  • Good moisturizing, bright and full solder joint, little smoke, no irritating smell.
  • Less residual, high insulation resistance, high activity, strong welding force.
  • Easy to weld, can protect BGA traces from corrosion and moisture.
  • Good wetting, dry resistance, long shelf life at room temperature
  • Used for high precision circuit board SMT welding, BGA process welding, CPU tin planting, etc.

Brazing Flux-RMA-218 140g Flux Paste BGA Reballing Soldering Repairing Tool

Brazing Flux-RMA-218 140g Flux Paste BGA Reballing Soldering Repairing Tool

    Features:

  • Less residual, high insulation resistance
  • Good moisturizing, bright and full solder joint, little smoke, no irritating smell.
  • Can protect BGA traces from corrosion and moisture.
  • Useful repair tool for your computer or cellphone BGA, etc.
  • Easy to weld, no false welding.

2.5MM Width 2.0M Length Low Residue Desoldering Wick Braid with Thumb Wheel Dispenser Welding Solder Remover Lead Cord For Phone BGA Flux Welding Cleaning Tool

2.5MM Width 2.0M Length Low Residue Desoldering Wick Braid with Thumb Wheel Dispenser Welding Solder Remover Lead Cord For Phone BGA Flux Welding Cleaning Tool

    Features:

  • Solder Removal Tool: 1pcs desoldering solder wick, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder
  • Desoldering Solder Wick Braid: Solder braid with the size 2.5mm Width, 2.0m Length, this desoldering wick with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area
  • Hight quality Shell: The body of the desoldering pen shell is made of high quality ABS, which make the solder sucker delicate and durable, make it comfortable to hold, thus it can be used for a long time
  • Weaving Design: Efficiently absorb excess solder when removing tinan solder holes, Adsorption tin paste clean, low residue, suitable for precision circuit board use, reduces the risk of damage to the motherboard
  • Widely Used of Solder Wick: The desoldering solder wick can be used to correct mistakes on PCB board, remove components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on SMD components and more

Huhudde 2 Pcs 10CC RMA-218 BGA Reballing No-Clean Repair Solder Flux Paste With Needles

Huhudde 2 Pcs 10CC RMA-218 BGA Reballing No-Clean Repair Solder Flux Paste With Needles

    Features:

  • Power cord is soft, can be bent, more durable
  • Simple operation, novel design
  • Good solder ability both in electrical conductivity and thermal conductivity.
  • Good solderability, insulation resistance and non-corrosive.
  • 100% brand new and high quality

CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 10g (2 X 5g) Ideal for VGA GPU repairs

CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 10g (2 X 5g) Ideal for VGA GPU repairs

    Features:

  • CS-FLUX when heated at around 150 degrees (Celsius) turns into liquid and covers the small gap between the BGA component and the PCB complitelly. This way all solder balls are covered with CS-FLUX and durring reflow or removal of the BGA componets all PCB and componet pads and balls are protected from oxydation.
  • CS-FLUX is no clean flux and causes no corrosion if not cleaned, but if needed it can be cleaned very easily with alcohol. It causes no corossion on the PCB or components.
  • Thank’s to it’s liquid nature, a very small amount of CS-FLUX is needed for each repair resulting in a much cleaner work enviroment. CS-FLUX is also Lead Free and halogen free and produces minimum amount of fume .
  • CS-FLUX is very sticky and specially designed to keep the solder balls inside the stencil durring the reballing proccess. It is also ideal for reflow of BGA components (with heatgun) when needed equipment for reballing is not avaliable. Due to it’s liquid nature is perfect for microsoldering even for not experienced technitians.
  • CS-FLUX is produced in EU (Greece). We keep stock all around the world so that it can be shipped to your workshop very fast.

As an Amazon Associate I earn from qualifying purchases.

Random products:

heel lift for running
mxr power supply