Elenco Two IC AM Radio Kit | Lead Free Solder | Great STEM Project | SOLDERING REQUIRED

Elenco Two IC AM Radio Kit | Lead Free Solder | Great STEM Project | SOLDERING REQUIRED

    Features:

  • Build complete radio on a single PC board
  • Teaches the basic theory of AM radio operation
  • Educationally sound project
  • Requires (1) 9V battery (not included)
  • From Elenco Electronics

Tecsun 2P3 AM Radio Receiver Kit – DIY for Enthusiasts, Built it into a Radio case !

Tecsun 2P3 AM Radio Receiver Kit - DIY for Enthusiasts, Built it into a Radio case !

    Features:

  • Build a high performance AM radio Receiver
  • DIY for enthusiasts, higher sensitivity than 99% AM radios on the market
  • Step-by-step Guide included
  • Great for learning and education
  • Completed it with a radio case, make it your favorite radio and take it anywhere you want, Tell and Show !

Elenco AM/FM Radio Kit |Switch Between ICs & Transistors | Lead Free Solder | Great STEM Project | Superheterodyne Designed to AM and FM Broadcasts | SOLDERING REQUIRED

Elenco AM/FM Radio Kit |Switch Between ICs & Transistors | Lead Free Solder | Great STEM Project | Superheterodyne Designed to AM and FM Broadcasts | SOLDERING REQUIRED

    Features:

  • Do & Learn – Soldering Required
  • 56 page Training Course is divided into 9 lessons
  • Audio Amp, AM Detector, AM IF, AM Amp, AM Mixer & Oscillator, FM Detector, 2 x FM IF, FM RF Stages
  • Electronics training course appropriate for High School and University level curriculum
  • “Superheterodyne” designed to receive standard AM and FM broadcast frequencies
  • “Superheterodyne” receiver of AM and FM broadcast frequencies
  • Unique PCB design lets you place parts over corrosponding symbols on the printed circuit board
  • Detailed manual is included to provide easy instruction
  • Theory of operation for each section explains what the stage was designed for, and how it works
  • For more than 30 years Elenco has been developing reliable and affordable electronic test equipment, tools, and educational kits

Elenco AM Radio Kit [ Combo IC & Transistor ] [ SOLDERING REQUIRED ]

Elenco AM Radio Kit [ Combo IC & Transistor ] [ SOLDERING REQUIRED ]

    Features:

  • AM Radio kit and training course – 7 Transistors and 2 Diodes
  • This training course is divided into 5 lessons: Audio Amplifier, Detector, IF Amplifier, Oscillator, and Mixer
  • Includes radio mounting stand
  • 5 easy to understand lessons including the theory of operation of for each section
  • For 30 years Elenco has been using their strong engineering and design skills to develop reliable, affordable electronic test equipment, tools, and educational kits

AM FM Radio Kit Soldering Project Kit for Learning Practicing Teaching Electronics by VOGURTIME, New Version

AM FM Radio Kit Soldering Project Kit for Learning Practicing Teaching Electronics by VOGURTIME, New Version

    Features:

  • Two kind of radio model – AM and FM. Two adjustment modes give you more choices
  • Great for STEM project. This kit is a solder electronic DIY kit, suitable for electronics learners and students to experiment with DIY teaching soldering electronic accessories. It not only to improve the soldering skills. but also you will learn more interesting electronics things!
  • No plastic case and other complicated accessories, the whole radio kit is simple and easy to make, it is a set of very interesting and academic electronic kits. With the reasonable design, the radio soldering project could be stable standing on any flat place.
  • Good quality fiberglass board with black oil on both sides, fast heat dissipation and high hardness. With the English Instructions and good packaging – No worry about the soldering or missing components.
  • 2 AA batteries are needed. Finished size: 12 x 8 x 5.5 cm ( The antenna is 30 cm) Please feel free to contact us if you have any needs..

One Chip AM Radio Kit – Assembly Required

One Chip AM Radio Kit - Assembly Required

    Features:

  • Complete AM radio on a PCB Kit
  • Uses Standard 9V battery
  • Fully Tunable with Audio Output
  • Full Instructions included
  • All parts included, ready for assembly & requires basic soldering skills.

SI4732 All Band Radio Audio Receiver FM AM SSB, Replacement Compact, Simple Installation – DIY Kits

SI4732 All Band Radio Audio Receiver FM AM SSB, Replacement Compact, Simple Installation - DIY Kits

    Features:

  • BFO Control; Battery not included
  • Frequency step switch (1, 5 and 10KHz)
  • 22 commercial and ham radio bands pre configured
  • Audio bandwidth filter 0.5, 1, 1.2, 2.2, 3 and 4Khz
  • FM, AM (MW and SW) and SSB (LSB and USB)

BephaMart AM Radio DIY Electronic Kit Learning Suite

BephaMart AM Radio DIY Electronic Kit Learning Suite

    Features:

  • Feature: Operating voltage: 3V
  • Receiving frequency: 535-1620KHZ Power: 0.5W

Marine Head Unit Receiver Speaker Kit – In-Dash LCD Digital Stereo Built-in Bluetooth & Microphone w/ AM FM Radio System 6.5’’ Waterproof Speakers (4) MP3/SD Readers & Remote Control – Pyle PLMRKT48BK

Marine Head Unit Receiver Speaker Kit - In-Dash LCD Digital Stereo Built-in Bluetooth & Microphone w/ AM FM Radio System 6.5’’ Waterproof Speakers (4) MP3/SD Readers & Remote Control - Pyle PLMRKT48BK

    Features:

  • RADIO USB READERS: Pyle marine receiver and speaker kit have an AM/FM stereo radio with 30 station memory. It also features USB flash and SD memory card readers with aux (3.5mm) input connector jack to connect and stream audio from external devices
  • LCD AND CONTROL BUTTONS: The in-dash receiver features ID3 that tag song readout for artist name or song title in the LCD digital display panel. It also has an illuminated front panel button controls for rear panel RCA (L/R) and preset equalizer (EQ)
  • BLUETOOTH AND MICROPHONE: Built-in Bluetooth for wireless music streaming receiver and integrated front-panel microphone for hands-free calling. It is compatible with all of your favorite Bluetooth devices like iPhone, Android, Smartphones, iPad, etc
  • 2-WAY CONE SPEAKERS: Pyle marine receiver includes four 6.5” speakers with marine grade waterproof construction. The speaker is pack with 4-ohm impedance rating, 20 oz. circuit magnet, 1.0” aluminum voice coil, and 45Hz – 16kHz frequency response
  • STEREO HEADUNIT: The head unit receiver is pack with single DIN universal size standard at 300 watts power peak that supports USB/SD memory up to 32GB. It measures 178W x 108D x 50H mm in chassis dimension. It also includes all power wiring harness

As an Amazon Associate I earn from qualifying purchases.

Random products:

ldy3 filter cartridge
qos jewelry